Plastic Laminate

Wilsonart® laminates conform to the voluntary standards of the American National Standards Institute/National Electrical Manufacturers Association (ANSI/NEMA) LD3-2000, for thickness, performance properties and appearance. Various grades of Wilsonart® laminates meet or exceed the International Standards Organization specifications as found in ISO 4586, titled “High-Pressure Decorative Laminate (HPDL) – Sheets Based on Thermosetting Resins – Part I: specifications.”

Stainless Steel

Sheet: ASTM A666, Type 302/304
Bar: ASTM A276, Type 301 (18-8)
Tube: ASTM A269, Type 301 (18-8)

#4 Satin Finish - General purpose, bright finish, with a 150-240 mesh abrasive, following initial grinding with coarser abrasives. Grain runs the long direction of each piece.

#8 Mirrored / Polished Finish - The most reflective finish commonly produced. It is obtained by polishing with successively finer abrasives, then buffing with a very fine buffing compound. The surface is essentially free of grit lines, though at certain angles some are still visible.

Muntz

Sheet: ASTM B36, alloy UNS C28000, Muntz Metal
Bar: ASTM B455, alloy UNS C38500, Architectural Muntz
Tube: ASTM B43, alloy UNS C23000, Red Brass

#4 Satin Finish - General purpose, bright finish, with a 150-240 mesh abrasive, following initial grinding with coarser abrasives. Grain runs the long direction of each piece. Lacquered after final forming / fabricating to provide durable finish.

#8 Mirrored / Polished Finish - The most reflective finish commonly produced. It is obtained by polishing with successively finer abrasives, then buffing with a very fine buffing compound. The surface is essentially free of grit lines, though at certain angles some are still visible. Lacquered after final forming / fabricating to provide durable finish.

Particleboard

ANSI A208.1, Type 1 mat formed particleboard weighing 45.0 lbs./cu.ft., manufactured of long fibered cuttings; fire–retardant treated (as required) meeting NFPA 101, Class A.